It is connected to the high-pressure line directly after the filter system and it can also be retrofitted to existing breathing air compressors. The measured values are clearly indicated on the illuminated display and as an option the compressor system can be automatically switched off by an alarm signal if the values for the breathing air are exceeded.
The new Puracon Mobil BA is the professional solution for mobile monitoring of air quality according to the European standard of breathing air. The system determines the moisture, CO, CO2, O2 and VOC * (oil) content in the compressed air within a few minutes. Air quality checks of already filled bottles can be carried out by using the high pressure throttle valve.
Puracon Stationary PRO is the professional solution for humidity monitoring during the filling procedure. The PRO version provides separated sensor and display unit. The sensor is connected directly to the high-pressure line after the humidity filter and is linked to the display unit via a data cable. Aluminum sensor housing with G¼“ inlet and outlet.
Puracon Stationary ECO is a cost-efficient solution for humidity monitoring during the filling procedure. The Puracon Stationary ECO can be connected directly to the high-pressure line after the humidity filter. The humidity value can be observed during the entire filling procedure. Exceeding of the limits will be indicated by a red LED.
Used for manual humidity monitoring during filling procedures or to check the equipment before diving. The humidity value can be controlled during the entire filling procedure. Exceeding of the limits will be indicated by a red LED. Can be connected directly between cylinder and filling hose (no installation work on the compressor required).